XLY-26-2 Two-mode brushless rotary hammer

Tool details

Select a numbered point on the image or hover over an item below.

1. 1

   SDS-plus quick-change chuck

   Push a bit in and it locks; pull the collar back to release it, no key needed. For drilling walls and fitting brackets.

2. 2

   Auxiliary handle

   It turns to a comfortable angle so you can hold the tool with both hands and keep the hole on line, and keep control if the bit catches.

3. 3

   Anti-vibration grip

   The rubber-covered grip has vibration damping, so your hands tire less over long drilling sessions.

4. 4

   21 V battery and fuel gauge

   The battery locks as it slides in; press the gauge to see how much charge is left. All four batteries, 2.0 to 8.0 Ah, fit every 21 V LEIYU tool.

5. 5

   Two-mode selector

   The selector switches between the two modes: hammer drilling for holes in walls, chiselling for chases and removing tiles.

6. 6

   Mechanical clutch

   If the bit jams on rebar, the clutch slips so the body does not wrench round, and your wrist takes less of a jolt.

7. 7

   Variable-speed trigger

   The trigger controls the speed: press lightly to start the hole, then squeeze harder once the bit bites.

8. 8

   Cooling vents

   Vents in the body cool the brushless motor, so it does not overheat easily during long drilling.