XLY-16-10 Compact brushless drill driver
The lightest LEIYU drill driver: 0.771 kg bare, 10 mm chuck, 10 per carton. It uses its own 16.8 V battery, not shared with the 21 V tools, and suits tight spaces inside cabinets, ceilings and equipment.
- Chuck size
- 10 mm
- Voltage platform
- 16.8 V
- Battery configuration
- 2 × 2.0 Ah
- Bare-tool weight
- 0.771 kg
Complete kit supplied: 2 batteries and 1 charger, 10 units per carton.
360° view
Hold the image and drag left or right to see every side of the tool; on a phone, swipe with your finger.
Tool details
Select a numbered point on the image or hover over an item below.
- 1
Keyless chuck
Tighten it with one hand to lock a drill bit or screwdriver bit; no key is needed to change bits. The chuck size is in the specifications.
- 2
Variable-speed trigger
The further you press the trigger, the faster it turns; start screws gently so the bit does not slip. The work light comes on with the trigger, so you can see inside cabinets and in corners.
- 3
Rubberised grip
Rubber overmould and anti-slip texture give a secure hold even with oily hands or gloves, for better control.
- 4
16.8 V battery
Its own 16.8 V battery keeps the tool light and compact; press the gauge on the battery to see how much charge is left.
- 5
Torque adjustment ring
Pick a setting for the material and screw size: low settings for soft materials, high ones for hardwood. The clutch slips at the set torque, so screw heads are not stripped; the last position is for drilling.
- 6
Two-speed switch
A switch on top of the body selects two speeds: speed 1 gives high torque for long screws, large holes and hard materials; speed 2 gives high speed for small holes and short screws.
- 7
Forward/reverse and electric brake
The switch above the trigger selects forward or reverse and locks the trigger in the middle position; release the trigger and the motor stops at once, so screws are not overdriven.
Product highlights
- Brushless motor
- A brushless motor has no carbon brushes to replace and gets more work out of each battery charge.
- Dedicated 16.8 V battery
- A smaller battery makes the whole tool lighter for overhead work and tight spaces.
- Two batteries and one charger
- Comes with two batteries and a charger.
- Larger motor in the second generation
- The second generation has a larger brushless motor, with upgraded magnets, bearings, control board, cells and gears; motor ratings are not overstated, and what the rating plate says is what you get.
- Overload protection
- The tool stops automatically if it jams or runs at full load for too long, protecting the motor and battery.
Who it is for and how to choose
A small drill for tight spaces such as cabinets, ceilings and the inside of equipment, and the lightest LEIYU drill; a model for stores supplying furniture fitters, electricians and equipment service technicians.
Compared with the XLY-21-10: the same 10 mm chuck at 0.771 kg bare, so lighter, but it uses its own 16.8 V battery, which does not swap with the 21 V tools. For customers who already use LEIYU 21 V tools, the XLY-21-10 is more convenient.
Technical specifications
Dimension drawings, certification documents or nameplate photos are available per model and can be sent with the quote.
Performance
- Model
- XLY-16-10
- Type
- Compact brushless drill driver
- Chuck size
- 10 mm
- Maximum torque
- 60 N·m
- No-load speed
- 0-500 / 0-1580 rpm
- Motor
- Brushless motor
Batteries and weight
- Voltage platform
- Dedicated 16.8 V battery
- Battery configuration
- 2 × 2.0 Ah
- Charger
- 1 piece
- Battery and charger warranty
- 1 year
- Bare-tool weight
- 0.771 kg
- Weight per battery
- 0.234 kg
- Complete kit weight
- 2.016 kg
Packaging
- Units per carton
- 10 units/carton
Standard configuration
- 1 ×Compact brushless drill driver XLY-16-10
- 2 ×16.8 V 2.0 Ah lithium battery
- 1 ×Charger
- 1 ×Tool case
- Manual and warranty card
Downloads
How to choose models, fill cartons and ask for a quote on a first order: Central Asia wholesale cordless tool purchasing guide
Frequently asked questions
Why does the XLY-16-10 use a 16.8 V battery?
A smaller battery makes the whole tool lighter, easier to hold overhead and to reach into tight spaces; the trade-off is that it cannot share batteries with the LEIYU 21 V tools.
What is included as standard?
1 tool, 2 × 2.0 Ah batteries and 1 charger. See Standard configuration above for the full list.
Can batteries be used with other LEIYU tools?
XLY-16-10 uses a dedicated 16.8 V battery that is not interchangeable with 21 V tools, allowing a smaller and lighter body.
How many tools are packed per carton? Can models be mixed?
10 units per carton, with a minimum order of one carton. Mixed models are available for the first order. List the models you need in your enquiry and we will confirm and quote.
How long is the warranty?
Batteries and chargers have a 1-year warranty, and LEIYU supplies spare parts for each model; the contract sets the final terms.
Which documents come with this model?
UN38.3 and MSDS documents are checked per model and sent with the quotation; the tool, battery and charger may have separate documents.
How do I request a quotation?
Press "Add to enquiry" to put the model on your list, add the battery option, quantity and delivery city and submit, or message us on WhatsApp. The quote states unit price, carton quantity, lead time, payment terms and available documents.
